* 5/6 TOOTH:

Ideal for die cutting high density foam products, Film or other sub states where it is necessary to cut into air or slot .
Available in thicknesses 2- 8 point and heights . 937” – 4.00”.

* Deep ‘V’:

Extremely sharp teeth with deep gullets achieve excellent performance with minimum pressure, when working with film , foam and even some specialty paper products such as thinner honeycomb . Available in thicknesses 2-8 point and heights.625”- 4.00”

* 2.7/4.6 tooth:

Originally custom designed for cutting plastic bags-now proven to be ideal for cutting foam or film available in thicknesses 2-8 point and height .937”- 4.00”

* Clean cut:

- 8.10 and 13 tooth Clean Cut are designed to cut with minimum pressure and penetration on both light and heavy board.
- Clean Cut is a multi-purpose rule that works extremely well on fibrous materials, plastic and corrugated boards. An excellent choice for tough lead edge applications.

* Prism:

Combines the benefits of a longer shaved bevel for improved release and with an induction hardened edge for longer life. It reduces edge crush and is excellent for medium to heavy boards.

* Scalloped:

A rule with an extremely durable tooth that works well in the most demanding of applications the 8 tooth centre bevel leaves a clean scalloped edge on solid fiber substrates , rubber and certain plastics and a straight edge on corrugated material.

* 11,16 and 20 tooth:

- 11 tooth is ideal for foam and composite materials that are likely to stretch prior to cutting .

- 16 tooth is suitable for displays and applications where edge appearances is critical .

- 20 tooth gives a clean edge and also performs well on lighter boards and micro flute .

* Standard:

A complete range of standard creasing rules from 3 point through to 8 point. Available with either a radius profile or a flat top.

* Laser crease:

Designed to save time by eliminating the need to cut 6 and 8 point lines, its thinner body makes it much easier to notch. Laser crease is made from a solid piece of tempered steel which ensures that the head will not separate from the base during die cutting .

* Tru-fold:

This exclusive rule has a bead formed on the 8 point head and a steel shoulder support to provide an accurate line score .